Product Search

    SEARCH NOW FOR ALL YOUR IDC USA SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 496.
    IDC USA LO95-1K

    IDC USA

    LO95-1K

    JAW COUPLING, WITH SET SCREW AND KEYWAY, 1 INCH BORE, 2 INCH OUTSIDE DIAMETER
    ✓ IN STOCK!
    £13.09 Price with VAT: £15.71 Buy Surplus As Low As £7.84 Price with VAT: £9.40
    £7.84 Price with VAT: £9.40
    IDC USA 3VJZF-25EP

    IDC USA

    3VJZF-25EP

    VACUUM VALVE, 1IN NPT, SOLENOID WITH PILOT AIR ASSIST, UP TO 100PSI OPERATING PRESSURE
    ✓ IN STOCK!
    £383.19 Price with VAT: £459.83 Buy Surplus As Low As £235.96 Price with VAT: £283.16
    £235.96 Price with VAT: £283.16
    IDC USA L095 5/8

    IDC USA

    L095 5/8

    JAW COUPLING, BORE 5/8, WIDTH 3/16, DEPTH 3/32, STEEL, CAST IRON
    ✓ IN STOCK!
    £18.75 Price with VAT: £22.50 Buy Surplus As Low As £9.78 Price with VAT: £11.73
    £9.78 Price with VAT: £11.73
    IDC USA R3D-205B-18-P-CSE

    IDC USA

    R3D-205B-18-P-CSE

    DISCONTINUED BY MANUFACTURER, ELECTRIC CYLINDER, BALL SCREW, 18 INCH STROKE LENGTH, MOTOR MOUNTED PARALLEL UNDERNEATH, FRONT & REAR FLANGE MOUNT, SINGLE CARRIAGE, (2) 18 IN LEAD WIRES
    ✓ IN STOCK!
    Buy Surplus As Low As £205.36 Price with VAT: £246.43
    £205.36 Price with VAT: £246.43
    Repair Yours £200.00 Price with VAT: £240.00
    IDC USA N316

    IDC USA

    N316

    DISCONTINUED BY MANUFACTURER, CYLINDRICAL ROLLER, SINGLE ROW, 80 MM X 170 MM X 39 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £184.74 Price with VAT: £221.69
    £184.74 Price with VAT: £221.69
    IDC USA H50B16F-1-1/4

    IDC USA

    H50B16F-1-1/4

    FINISHED BORE SPROCKET, 16 TEETH, 1-1/4IN BORE
    ✓ IN STOCK!
    £15.07 Price with VAT: £18.09 Buy Surplus As Low As £8.28 Price with VAT: £9.93
    £8.28 Price with VAT: £9.93
    IDC USA H50B14F-1-1/4

    IDC USA

    H50B14F-1-1/4

    FINISHED BORE SPROCKET, 14 TEETH, 5/16IN SCREW, 5/8IN PITCH, STEEL
    ✓ IN STOCK!
    £19.13 Price with VAT: £22.96 Buy Surplus As Low As £11.59 Price with VAT: £13.91
    £11.59 Price with VAT: £13.91
    IDC USA H-1-3/8

    IDC USA

    H-1-3/8

    TAPERED BUSHING, STYLE H, SPLIT BARREL/FLANGE, KEYWAY, 1-3/8INCH BUSHING SIZE, CAST IRON MATERIAL
    ✓ IN STOCK!
    £18.29 Price with VAT: £21.94 Buy Surplus As Low As £11.26 Price with VAT: £13.52
    £11.26 Price with VAT: £13.52
    IDC USA 6800-2RS

    IDC USA

    6800-2RS

    BEARING, 10MM ID,19MM OD,5MM WIDTH
    ✓ IN STOCK!
    £1.85 Price with VAT: £2.21 Buy Surplus As Low As £1.14 Price with VAT: £1.36
    £1.14 Price with VAT: £1.36
    IDC USA 6904-2RS

    IDC USA

    6904-2RS

    BEARING,20MM ID, 37MM OD, 9MM WIDTH,SEALED
    ✓ IN STOCK!
    £8.22 Price with VAT: £9.86 Buy Surplus As Low As £4.55 Price with VAT: £5.46
    £4.55 Price with VAT: £5.46
    IDC USA SER207-20

    IDC USA

    SER207-20

    DISCONTINUED BY MANUFACTURER, INSERT BEARING, SNAP RING, SCREWS, RUBBER SEAL, 57800 LOAD CAPACITY
    ✓ IN STOCK!
    Buy Surplus As Low As £9.48 Price with VAT: £11.37
    £9.48 Price with VAT: £11.37
    IDC USA H40B13F-1

    IDC USA

    H40B13F-1

    SPROCKET, FINISHED BORE, 13 TEETH, 2.33 INCH OUTSIDE DIAMETER, 1 INCH BORE DIAMETER, 13 TEETH, BLACK OXIDE FINISH, 40 BORE SERIES
    ✓ IN STOCK!
    £13.45 Price with VAT: £16.13 Buy Surplus As Low As £7.63 Price with VAT: £9.15
    £7.63 Price with VAT: £9.15
    IDC USA H35B28F-3/4

    IDC USA

    H35B28F-3/4

    SPROCKET, FINISHED BORE, 3/4 INCH BORE DIAMETER, 28 TEETH, 3/8 INCH PITCH, BLACK OXIDE FINISH
    ✓ IN STOCK!
    £18.67 Price with VAT: £22.41 Buy Surplus As Low As £10.35 Price with VAT: £12.41
    £10.35 Price with VAT: £12.41
    IDC USA SSER12

    IDC USA

    SSER12

    STAINLESS STEEL INSERT W/SNAP RING, SET SCREWS 120 DEGRESS APART, LUBRICATION GROOVE WITH HOLE OPPOSITE SET SCREW SIDE
    ✓ IN STOCK!
    £116.53 Price with VAT: £139.83 Buy Surplus As Low As £63.71 Price with VAT: £76.45
    £63.71 Price with VAT: £76.45
    IDC USA 2517-2-3/16

    IDC USA

    2517-2-3/16

    BUSHING, 2517 SERIES, IDC SELECT, TAPERED LOCK, 2.1875 INCH BORE, 3.375 INCH OUTSIDE DIAMETER, 2 BOLT HOLE
    ✓ IN STOCK!
    £41.14 Price with VAT: £49.37 Buy Surplus As Low As £28.52 Price with VAT: £34.22
    £28.52 Price with VAT: £34.22
    IDC USA 2012-50MM

    IDC USA

    2012-50MM

    TAPER LOCK B USHING - 2012 SERIES, 50 MM BORE, 14 X 3.8 MM KEYWAY, STEEL MATERIAL, 2 SCREW
    ✓ IN STOCK!
    £20.91 Price with VAT: £25.10 Buy Surplus As Low As £11.98 Price with VAT: £14.38
    £11.98 Price with VAT: £14.38
    IDC USA SH-3/4

    IDC USA

    SH-3/4

    DISCONTINUED BY MANUFACTURER, BUSHING, SH SERIES, QD STYLE, BORE TYPE FINISHED W/ KEYWAY, BORE DIAMETER 3/4', FLANGE THICKNESS 7/16', CAST IRON MATERIAL
    ✓ IN STOCK!
    Buy Surplus As Low As £16.34 Price with VAT: £19.60
    £16.34 Price with VAT: £19.60
    IDC USA P13L050.5

    IDC USA

    P13L050.5

    TIMING PULLEY, 13 TEETH, 1.552 PITCH DIAMETER, 1.522 PULLEY OD, 3/4 BORE
    ✓ IN STOCK!
    £14.19 Price with VAT: £17.03 Buy Surplus As Low As £8.17 Price with VAT: £9.81
    £8.17 Price with VAT: £9.81
    IDC USA 1610X5/8

    IDC USA

    1610X5/8

    TAPER LOCK BUSHING , 1610 SERIES, 5/8 IN BORE, 3/16 X 3/32 IN KEYWAY, SINTERED STEEL MATERIAL
    ✓ IN STOCK!
    £56.77 Price with VAT: £68.12 Buy Surplus As Low As £35.09 Price with VAT: £42.11
    £35.09 Price with VAT: £42.11
    IDC USA R10 ZZ

    IDC USA

    R10 ZZ

    MINIATURE DEEP GROOVE BALL BEARING, 5/8’’, MATERIAL: STEEL, DOUBLE SHIELD, LOAD CAPACITY: 1347 LB, 18000 RPM GREASE/22000 RPM OIL, OUTSIDE DIAMETER 1-3/8’’, STEEL, R SERIES, WIDTH: 0.3438’’
    ✓ IN STOCK!
    £16.43 Price with VAT: £19.72 Buy Surplus As Low As £12.70 Price with VAT: £15.24
    £12.70 Price with VAT: £15.24
    IDC USA 6800ZZ

    IDC USA

    6800ZZ

    DISCONTINUED BY MANUFACTURER, BALL BEARING, SINGLE ROW, SHIELDED, 10 MM BORE, 19 MM OUTER DIAMETER, 5 MM WIDTH, STATIC/DYNAMIC LOAD: 208/410 LBF, 30000 RPM
    ✓ IN STOCK!
    Buy Surplus As Low As £4.54 Price with VAT: £5.45
    £4.54 Price with VAT: £5.45
    IDC USA 16412RS

    IDC USA

    16412RS

    HIGH-LOAD BALL BEARING, SEALED, 1" ID
    ✓ IN STOCK!
    £54.53 Price with VAT: £65.43 Buy Surplus As Low As £30.49 Price with VAT: £36.59
    £30.49 Price with VAT: £36.59
    IDC USA SK-32MM

    IDC USA

    SK-32MM

    DISCONTINUED BY MANUFACTURER, 32MM, QD BUSHING
    ✓ IN STOCK!
    Buy Surplus As Low As £11.90 Price with VAT: £14.28
    £11.90 Price with VAT: £14.28
    IDC USA 3020-1-7/8

    IDC USA

    3020-1-7/8

    TAPERLOCK BUSHING, IDC SELECT, ANSI STANDARD DESIGN, CLEAN AND COMPACT, 790 IN-LB, 8-DEGREE TAPER, 4-1/4 INCH BARREL DIAMETER, 1-7/8 INCH BORE DIAMETER, 4 INCH BOLT DIAMETER, FLUSH MOUNT, NO ...
    ✓ IN STOCK!
    £51.12 Price with VAT: £61.35 Buy Surplus As Low As £28.14 Price with VAT: £33.77
    £28.14 Price with VAT: £33.77
    IDC USA 2517-1-1/2

    IDC USA

    2517-1-1/2

    TAPERLOCK BUSHING, IDC SELECT, ANSI STANDARD DESIGN, CLEAN / COMPACT, 790 IN-LB, 8-DEGREE TAPER, 3-3/8 INCH BARREL DIA, 1-1/2 INCH BORE DIA, 3-1/2 INCH INCH BOLT DIA, 1-3/4 INCH OVERALL LENG ...
    ✓ IN STOCK!
    £33.99 Price with VAT: £40.78 Buy Surplus As Low As £16.39 Price with VAT: £19.67
    £16.39 Price with VAT: £19.67
    IDC USA 6207-2RS

    IDC USA

    6207-2RS

    DISCONTINUED BY MANUFACTURER, RADIAL/DEEP GROOVE BALL BEARING, 35 MM ID, 72 MM OD, 17 MM WIDTH
    ✓ IN STOCK!
    Buy Surplus As Low As £18.29 Price with VAT: £21.95
    £18.29 Price with VAT: £21.95
    IDC USA 6901ZZ

    IDC USA

    6901ZZ

    BEARING, 12MM ID,24MM OD, 6MM WIDTH
    ✓ IN STOCK!
    £3.73 Price with VAT: £4.47 Buy Surplus As Low As £2.55 Price with VAT: £3.06
    £2.55 Price with VAT: £3.06
    IDC USA IDC SF-1-7/16

    IDC USA

    IDC SF-1-7/16

    QD STYLE BUSHING, SPLIT BARREL AND FLANGE, 1 7/16 IN BORE DIAMETER, 3 SET SCREWS
    £55.27 Price with VAT: £66.33 Buy Surplus As Low As £34.49 Price with VAT: £41.38
    £34.49 Price with VAT: £41.38
    IDC USA L100 X 1 1/8

    IDC USA

    L100 X 1 1/8

    COUPLING JAW, FINISHED BORE, SET-SCREW, KEYWAY
    ✓ IN STOCK!
    £31.37 Price with VAT: £37.65 Buy Surplus As Low As £19.36 Price with VAT: £23.23
    £19.36 Price with VAT: £23.23
    IDC USA Q1-2-3/16

    IDC USA

    Q1-2-3/16

    BUSHING, IDC SELECT, SPLIT TAPER, DOUBLE, 2-3/16 INCH DIAMETER BORE, FINISHED BORE, NODULAR GRAPHITE CAST IRON
    ✓ IN STOCK!
    £49.30 Price with VAT: £59.16 Buy Surplus As Low As £30.86 Price with VAT: £37.03
    £30.86 Price with VAT: £37.03
    IDC USA UCP207-23

    IDC USA

    UCP207-23

    BEARING, IDC SELECT, PILLOW BLOCK, STANDARD DUTY, 2-BOLT, SET SCREW MOUNT
    ✓ IN STOCK!
    £41.30 Price with VAT: £49.56 Buy Surplus As Low As £24.39 Price with VAT: £29.27
    £24.39 Price with VAT: £29.27
    IDC USA 1654 2RS

    IDC USA

    1654 2RS

    DISCONTINUED BY MANUFACTURER, BALL BEARING, DEEP GROOVE, 1-1/4 INCH BORE X 2-1/2 INCH OUTSIDE DIMENTION
    ✓ IN STOCK!
    Buy Surplus As Low As £16.17 Price with VAT: £19.41
    £16.17 Price with VAT: £19.41
    IDC USA SB205-16G

    IDC USA

    SB205-16G

    DISCONTINUED BY MANUFACTURER, BALL BEARING INSERT
    Buy Surplus As Low As £38.09 Price with VAT: £45.71
    £38.09 Price with VAT: £45.71
    IDC USA 60-1R

    IDC USA

    60-1R

    DISCONTINUED BY MANUFACTURER, RIVETED ROLLER CHAIN 10INCH
    Buy Surplus As Low As £4.24 Price with VAT: £5.08
    £4.24 Price with VAT: £5.08
    IDC USA 6005

    IDC USA

    6005

    BEARING, OPEN, SINGLE ROW, DEEP GROOVE, 25X47X12 MM
    £14.94 Price with VAT: £17.93 Buy Surplus As Low As £8.96 Price with VAT: £10.76
    £8.96 Price with VAT: £10.76
    IDC USA 6905

    IDC USA

    6905

    DISCONTINUED BY MANUFACTURER, BEARING
    Buy Surplus As Low As £3.33 Price with VAT: £3.99
    £3.33 Price with VAT: £3.99
    IDC USA 6304

    IDC USA

    6304

    DISCONTINUED BY MANUFACTURER, BALL BEARING, OPEN, SINGLE ROW, RADIAL, 20 X 52 X 15 MM
    Buy Surplus As Low As £6.72 Price with VAT: £8.07
    £6.72 Price with VAT: £8.07
    IDC USA 80H-1R-50

    IDC USA

    80H-1R-50

    ROLLER CHAIN, HEAVY DUTY, 1 INCH PITCH, 5/8 INCH INNER WIDTH, AVERAGE TENSILE STRENGTH: 17196 LBS, MAX WORKLOAD: 3638 LBS, 600 LINKS, 50 FOOT LENGTH
    £404.85 Price with VAT: £485.82 Buy Surplus As Low As £243.51 Price with VAT: £292.21
    £243.51 Price with VAT: £292.21
    IDC USA 4016CC

    IDC USA

    4016CC

    COUPLING CHAIN 0.500IN PITCH
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.70 Price with VAT: £6.84
    £5.70 Price with VAT: £6.84
    IDC USA SO6-F

    IDC USA

    SO6-F

    FINE THREAD IDLER SHAFT, 1.5" DIAMETER, 1-14 THREADED END, SAME AS GOLD SPEC GS-SO6
    £77.68 Price with VAT: £93.22 Buy Surplus As Low As £47.06 Price with VAT: £56.47
    £47.06 Price with VAT: £56.47
    IDC USA 2BK140H

    IDC USA

    2BK140H

    BUSHING SHEAVE, USE WITH 4L, A,5L, OR B BELTS, 6500 FPM RIM SPEED MAX, BAKED ENAMEL FINISH, STATICALLY BALANCED, GRAY CAST IRON
    £132.96 Price with VAT: £159.55 Buy Surplus As Low As £79.92 Price with VAT: £95.91
    £79.92 Price with VAT: £95.91
    IDC USA 2BK55H

    IDC USA

    2BK55H

    DISCONTINUED BY MANUFACTURER, SHEAVE, H SERIES, TWO GROOVE, 5.25 INCH OUTER DIAMETER, 4.50 INCH, CAST IRON
    Buy Surplus As Low As £134.45 Price with VAT: £161.34
    £134.45 Price with VAT: £161.34
    IDC USA P30XL037A

    IDC USA

    P30XL037A

    DISCONTINUED BY MANUFACTURER, PULLEY
    Buy Surplus As Low As £7.22 Price with VAT: £8.66
    £7.22 Price with VAT: £8.66
    IDC USA UCF212-38

    IDC USA

    UCF212-38

    BEARING, 4-BOLT FLANGE UNIT, W/ SET SCREWS, 2-3/8", STATIC 8138 LBF / DYNAMIC 11780 LBF
    £182.26 Price with VAT: £218.71 Buy Surplus As Low As £109.80 Price with VAT: £131.76
    £109.80 Price with VAT: £131.76
    IDC USA CSA207-23

    IDC USA

    CSA207-23

    DISCONTINUED BY MANUFACTURER, CYLINDRICAL O.D.
    Buy Surplus As Low As £8.22 Price with VAT: £9.86
    £8.22 Price with VAT: £9.86
    IDC USA 30H100Q-SD

    IDC USA

    30H100Q-SD

    BELT PULLEY 45MM BORE
    £55.07 Price with VAT: £66.09 Buy Surplus As Low As £27.91 Price with VAT: £33.50
    £27.91 Price with VAT: £33.50
    IDC USA H80B45-1-3/8

    IDC USA

    H80B45-1-3/8

    SPROCKET 1-3/8INCH BORE 45TEETH 1INCH PITCH
    £231.56 Price with VAT: £277.87 Buy Surplus As Low As £115.78 Price with VAT: £138.93
    £115.78 Price with VAT: £138.93
    IDC USA R20-2RD

    IDC USA

    R20-2RD

    IDC USA , BEARING, BALL, 1-1/4IN ID, 2-1/4IN OD 1/2IN D
    £11.55 Price with VAT: £13.86 Buy Surplus As Low As £6.92 Price with VAT: £8.31
    £6.92 Price with VAT: £8.31
    IDC USA UCF207-23

    IDC USA

    UCF207-23

    FLANGE BEARING, 4 BOLT, UCF, FLANGE MOUNT, SET SCREW LOCK, CAST IRON HOUSING, NON-EXPANSION (FIXED), STANDARD DUTY, FLINGER SEAL, 1-7/16 INCH BORE, 4-39/64 INCH LENGTH
    £43.94 Price with VAT: £52.73 Buy Surplus As Low As £25.65 Price with VAT: £30.78
    £25.65 Price with VAT: £30.78
    IDC USA UCF207-35MM

    IDC USA

    UCF207-35MM

    BOLT FLANGE
    £19.42 Price with VAT: £23.30 Buy Surplus As Low As £11.95 Price with VAT: £14.34
    £11.95 Price with VAT: £14.34
    Previous Next
    1 2 3 4 5 6 7 8 9 10